WASTE MILL

WASTE MILL
TR 1 TOOTH MILL FOR WASTES
The mill is a machine which shreds wooden wastes such as pallets, chipboard, veneer, boards, paper and other waste materials.
This shredding is performed by a steel rotor where high-quality steel teeth are screwed on.

MACHINE ACCESSORIES:
Loading hopper
Loading platform
Magnet to remove iron materials


	*TECHNICAL DATA*		TR 1 TOOTH MILL FOR WASTES
--	Size of loading inlet	--	mm. 1150x1580
	Motor power		KW 37 - HP 50
	Production		2000 - 3000 DaN/h
	Weight		5200 DaN
	Grid with holes Ø		20 mm. (or according to requirements)
	Hydraulic central unit		Kw2.2
	Rotor Ø		350 mm.
	Rotor rpm		90 /min.
	Rotor teeth		36 - 78 rectangular teeth, according to the material
	Size of tooth		80 x 40 mm.
	Outlet		Ø 240 mm.
	Feeding screw rpm		48 /min.
	Feeding screw motor		KW 0.75
	Noise		at 2 m: 88 dBA


	*TECHNICAL DATA*		TR 2 TOOTH MILL FOR WASTES
--	Size of loading inlet	--	mm. 865x740
	Motor power		KW 22 - HP 30
	Weight		1500 DaN
	Grid with holes Ø		20 mm. (or according to requirements)
	Hydraulic central unit		KW 0.75
	Production		500-600 DaN/h
	Rotor Ø		270 mm.
	Rotor rpm		180 circa /min.
	Rotor teeth		67
	Size of tooth		80 x 40
	Outlet		Ø 240 mm.
	Noise		at 2 m: 88 dBA


	*TECHNICAL DATA*		TR 3 TOOTH MILL FOR WASTES
--	Size of loading inlet	--	mm. 755x420
	Motor power		KW 15 - HP 20
	Production		200 - 300 DaN/h
	Weight		1000 DaN
	Grid with holes Ø		20 mm. (or according to requirements)
	Hydraulic central unit		0.37 KW - 220/380 V
	Rotor Ø		220 mm.
	Rotor rpm		93 circa /min.
	Rotor teeth		21 rectangular teeth, according to the material
	Size of tooth		80 x 40
	Outlet		Ø 180 mm.
	Noise		at 2 m: 88 dBA.